A stationary device designed to control the filling level of open and closed tanks, hoppers, columns other technological devices by liquids, suspensions, bulk materials and other media.
It is an optimal device according to its characteristics to control the level of liquid with “fuzzy” boundary between phases, liquids with hills, depressions and foam at the upper boundary of the liquid, “boiling”, agressive and flammable liquids.
Area of application
Mining, coal, cement, chemical, metallurgical industry, as well as the nuclear fuel cycle enterprises.
Number of controlled levels for SUR-T1 | 1 | |
Number of controlled levels for SUR-T2 | 2 | |
Absolute value of the variation from the set level during the control level ofphase interface water – air | No more than 0,1 м | |
Operation mode setup time | No more than 30minute | |
Duration of continuous work | No more than 24hours | |
The device is powered by AC of 50 ± 1 Hz, with voltage of | from 187 to 242 В | |
Alternating Voltage at “dry contact ” circuit with current of up to 6A | to 380 В | |
Operating temperature range: – for detection unit BDPG – for indicating device USR |
from – 30°С to + 50°С
from + 5°С to + 50°С |
|
Relative humidity | to 100 % under + 35°С | |
Level of casing protection | No worse IP54 | |
Distance between the detection unit and the measuring remote control | to 1200 м | |
Mean time between failures | No less than 10000hours | |
Average lifetime | No less than 10 years | |
Output signals of the signaling device: – sign-numeric display; – Two outputs of “dry contact” (output of optosemistora); – RS-485/RS-422 and RS-232cconnecting interfaces |
||
Designation | Overall dimensions | Weight |
Detection unit BDPG | Ø50×240 мм | 1,0 kg |
Bs Matching unit | 176×80×64 мм | 0,5 kg |
Collimator | 160×160×120 мм | 20,0 kg |
Measuring remote control | 220×140×110 мм | 3,0 kg |
Normal 0 21 false false false UK X-NONE X-NONE MicrosoftInternetExplorer4
Features:
•presence inthe signaling deviceof the twodetection unitsandoutputcommutatorsof “drycontact”type thatprovides:
– Ability to controlthe filling levelof the twocontainers in the same time;
– possibility ofregulationthe degree offilling(includingat a highrate of filling)during the installationof twodetection unitsat different heightsona singlecontainer;
•internalself-testwith a messageabout theproblem;
- setting the value”hysteresis”from the remote co